Xref: utzoo comp.terminals:2215 comp.os.vms:29024
Path: utzoo!utgpu!watserv1!ria!rrivax.rri.uwo.ca!lrb
From: lrb@rrivax.rri.uwo.ca (Lance R. Bailey)
Newsgroups: comp.terminals,comp.os.vms
Subject: Re: Acessing VMS from an HP  terminal
Message-ID: <775@ria.ccs.uwo.ca>
Date: 14 Aug 90 13:27:01 GMT
References: <13585@ulysses.att.com>
Sender: news@ria.ccs.uwo.ca
Reply-To: lrb@rrivax.rri.uwo.ca
Followup-To: comp.terminals
Organization: Robarts Research Institute -- London Canada Earth
Lines: 12
News-Software: VAX/VMS VNEWS 1.3-4

In article <13585@ulysses.att.com>, mab@ulysses.att.com (Muhammad Basit[rs]) writes...
> 
>I have an HP terminal that I use to connect to Ultrix and VMS
>systems (thru modem). On Ultrix i have no problem but on VMS 

you need to define one of the terminal types FT1 through FT8 to be
a HP terminal.
_________________________________
Lance R. Bailey, Systems Manager | Robarts Research Institute
email: lrb@rri.uwo.ca            | Clinical Trials Resources Group
  vox: 519-663-3787 ext. 4108    | P.O. Box 5015, 100 Perth Dr.
  fax: 519-663-3789              | London, Canada N6A 5K8