Path: utzoo!dciem!array!colin
From: colin@array.UUCP (Colin Plumb)
Newsgroups: comp.dcom.modems
Subject: Re: Telebit registers
Keywords: Telebit registers
Message-ID: <559@array.UUCP>
Date: 20 Aug 90 16:05:23 GMT
References: <147@grumbly.UUCP>
Organization: Array Systems Computing, Inc., Toronto, Ontario, CANADA
Lines: 19

In article <147@grumbly.UUCP> root@grumbly.com writes:
> Does anyone know how to access Telebit registers S70, S71, S72, S73, S74,
> S75, S76, S77, S78 - or seen a program to read these during a connection?

While the connection is set up, just do:
<pause>+++<pause>	(or whatever your escape sequence is)
OK
ats70?s71?s72?...
(register dump goes here)
OK
ato			(return to connection)
CONNECT FAST/UUCP	(or whatever)

You can also use the secondary port, I think... some extra pins on the
RS232 port are used to make a second serial port that can be used for
an out-of-band control channel.  I've never tried it myself, but the
first technique I described, I can vouch for.
-- 
	-Colin