Path: utzoo!censor!geac!aimed!ncrcan!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!mahendo!wlbr!pete
From: pete@wlbr.IMSD.CONTEL.COM (Pete Lyall)
Newsgroups: comp.os.os9
Subject: Re: signal problem
Message-ID: <57281@wlbr.IMSD.CONTEL.COM>
Date: 24 Aug 90 17:35:30 GMT
References: <5596@ethz.UUCP> <3943@disk.UUCP> <5671@ethz.UUCP>
Reply-To: pete@wlbr.imsd.contel.com.UUCP (Pete Lyall)
Organization: Contel FSD, Westlake Village, CA
Lines: 12

If you have a signal handler routine setup  (either signal() or
interrupt()), you can just set a flag that indicates that a
signal was received, and probably what kind of signal it was. Then,
you just exit the intercept handler. The I/O should complete normally,
and then you can manually check the flag yourself.

Pete

-- 
Pete Lyall                                                   Contel Corporation
Compuserve: 76703,4230              OS9_Net: (805) 375-1401 (24hr 300/1200/2400)
Internet: pete@wlbr.imsd.contel.com     UUCP: {hacgate,jplgodo,voder}!wlbr!pete