Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!munnari.oz.au!evan From: evan@cs.mu.OZ.AU (Evan Harris) Newsgroups: comp.periphs.scsi Subject: Drive not recognised by diag Message-ID: Date: 21 Aug 90 08:41:28 GMT Sender: news@cs.mu.oz.au Reply-To: evan@goanna.cs.rmit.OZ.AU Distribution: comp Organization: Computer Science, University of Melbourne, Australia Lines: 24 We are attempting to install a new Micropolis 1588-15 SCSI drive with a Sun 3/60 running SunOS 3.5 via an Emulex MD21 controller. The controller already has a SCSI disk and tape drive attached. The new drive is set to be SCSI unit 1, the Emulex unaltered, however diag cannot find the new drive, instead producing: ncycl 1614 acyl 2 nhead 15 nsect 54 interleave 1 reset the SCSI bus... Test unit ready failed, cyl=0, head=0, sector=0 scb: 2 check sense bytes: 70 0 2 0 0 0 0 A 0 0 0 0 FF sense class 7 sense key 2 Not Ready. block no. 0 It still works fine for unit 0, and the drive is ok. Have we missed something obvious? Thanks in advance for any information. -------------------------------8<------------------------------- Evan Harris evan@goanna.cs.rmit.OZ.AU Dept. of Computer Science ...!uunet!goanna.cs.rmit.OZ.AU!evan RMIT, Australia