Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!mit-eddie!bloom-beacon!eru!luth!sunic!tut!funic!santra!punisher.hut.fi!napo
From: napo@punisher.hut.fi (Hannu Napari)
Newsgroups: comp.sys.amiga.hardware
Subject: Hardframe / ST296N problem...
Summary: It ain't working anymore.
Keywords: Seagate, ST296N, HardFrame
Message-ID: <1990Aug24.061559.23378@santra.uucp>
Date: 24 Aug 90 06:15:59 GMT
Sender: news@santra.uucp (Cnews - USENET news system)
Reply-To: napo@niksula.hut.fi (Hannu Napari)
Organization: Helsinki University of Technology, Finland
Lines: 18


I seem to be having a slight problem with my HardFrame/ST296N. Last night
it worked fine for several hours, until... I started to load a program,
and then the r/w-led just stayed lit. The program didn't load and there
were no sound of the r/w-heads moving. After C-A-A, the r/w-led blinked,
as the controller tried to boot. The boot failed. I switched the power
off and tried to cold boot. Well...the HF doesn't even find any SCSI-
devices anymore.

I'm intending to test the controller with a working hd, and I'm
interested to hear if someone has had similar problems either with
HardFrame or ST296N. (Ok, I know it is a Seagate, but it was cheap...8)

--
Napo    $ On the rebound, fumbling all the lines / The light at the end
(leon)  $ of the bottle / Alcoholic alphabet, through the looking glass /
        $ The proof in my own reflection, reflection / Five senses down
        $ and reeling on the Cinderella search / Cinderella search, search