Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!mips!bridge2!3comvax!tymix!tardis!jms
From: jms@tardis.Tymnet.COM (Joe Smith)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: AmiGen/A3000 Compatibility problems: HELP!
Summary: Works for me
Message-ID: <1192@tardis.Tymnet.COM>
Date: 26 Aug 90 08:42:58 GMT
References: <1107@orange9.qtp.ufl.edu>
Reply-To: jms@tardis.Tymnet.COM (Joe Smith)
Distribution: na
Organization: BT Tymnet, San Jose, CA
Lines: 22

In article <1107@orange9.qtp.ufl.edu> sutherla@qtp.ufl.edu (Scott Sutherland) writes:
>	Has anyone been able to get the AmiGen to work with the A3000?
>I was NOT able to have the 1950 monitor hooked up simultaneously with
>the AmiGen since the cable will not fit when the AmiGen is in place.
> I did NOT have a 9-pin
>male to 9-pin female cable to test the RGB throughput to the 2002.

It works for me.  The VIDEO-OUT connector from the AmiGen works fine 
connected to the composite-input on my A2002 or my VCR.  The 9-pin RGB
output of the AmiGen works fine with the A2002 or my Sony KV25XBR TV.

The 9-pin to 15-pin adaptor that comes with the A1950 does not work for
connecting the A1950 to the AmiGen's RGB out.  I think it's designed for
the signals that come out of an IBM-PC, not from the Amiga.

The A1950 can be plugged in at the same time as the AmiGen if you shave
a little of the plastic off of the side of the 15-pin plug.
-- 
Joe Smith (408)922-6220 | SMTP: jms@tardis.tymnet.com or jms@gemini.tymnet.com
BT Tymnet Tech Services | UUCP: ...!{ames,pyramid}!oliveb!tymix!tardis!jms
PO Box 49019, MS-C51    | BIX: smithjoe | 12 PDP-10s still running! "POPJ P,"
San Jose, CA 95161-9019 | humorous dislaimer: "My Amiga speaks for me."