Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!haven!udel!burdvax!jtids!flash
From: flash@jtids.UUCP (Lindsay Markus )
Newsgroups: comp.sys.amiga.tech
Subject: Re: Palomax help needed
Message-ID: <574@jtids.UUCP>
Date: 21 Aug 90 16:43:50 GMT
References: <12604@hydra.gatech.EDU>
Lines: 19

From article <12604@hydra.gatech.EDU>, by gt4662b@prism.gatech.EDU (BRANHAM,JOSEPH FRANKLIN):
> 
> HELP!! I'm almost completed putting together a Palomax interface. I can even
> get the drive to format and read verify. My only problem is that I can't get
> the testhd3.1 or the hdconfig3.1 programs to recognize my hdparams file.
> Following is what the file looks like:
> 
> ----------------------------Begin File----------------------------------------
> cont F7FFE0
> sect 17, 26   <-- !!!!! This must EITHER be 17 OR 26 depending on your 
                          controller.


ALSO the technical support is SUPERB at PALOMAX.  Give Mr. Koehler a call.
at 215-672-6815.

NOTE:  There are examples of HDParams files in the manual.

Lindsay Markus