Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!sdd.hp.com!ucsd!nosc!crash!pnet01!uzun
From: uzun@pnet01.cts.com (Roger Uzun)
Newsgroups: comp.sys.amiga.tech
Subject: Re: 2 meg Agnus in Amiga 2000
Message-ID: <4097@crash.cts.com>
Date: 25 Aug 90 05:16:09 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 11

I believe some signals that were internal to the old agnus have been brought
out or vice versa, so it was said that additional hardware would be required,
you cannot just redirect the pinout of the new agnus to sockets on the old
(2000) motherboard, I imagine you have to cut a trace on the motherboard
to get at some/insert some required signal.

-Roger

UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!uzun
ARPA: crash!pnet01!uzun@nosc.mil
INET: uzun@pnet01.cts.com