Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!sdd.hp.com!decwrl!bacchus.pa.dec.com!shlump.nac.dec.com!ryn.esg.dec.com!skivt.enet.dec.com!hearn
From: hearn@skivt.enet.dec.com (Rich Hearn)
Newsgroups: comp.sys.atari.st
Subject: Help with PC-Ditto & BMS200/ST277N booting MS-DOS
Message-ID: <2544@ryn.esg.dec.com>
Date: 21 Aug 90 19:21:43 GMT
Sender: guest@ryn.esg.dec.com
Organization: Digital Equipment Corporation
Lines: 22



	I've got a 1040STf with a SEAGATE 277N running thru a BMS
	Berkely Microsystems) 200 controller.  I'm trying to get
	PC-Ditto to 'boot' from the hard disk, but PC-Ditto never
	"sees" the drive C as bootable.  I've followed the PC-
	Ditto procedures exactly (to the best of my knowledge), and
	talked to Chris at BMS (PLUG: Chris has been excellent in both
	his attitude and knowledge on his product; also his willing-
	ness to help me - I purchased his product used) who does
	have PC-Ditto working on his equip.  I've used his procedure
	and still no-go.  
	
	Would anyone have any ideas as to what I could be doing 
	wrong?

	Any thoughts or explainations on how PC-Ditto (v3.01)/MS-DOS (v3.30)
	"works" would be appreciated.

							Tnx,

							    Rich