Xref: utzoo comp.unix.ultrix:4279 comp.sys.hp:5974
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!wuarchive!mit-eddie!bloom-beacon!eru!luth!sunic!tut!funic!fuug!sti!ttl
From: ttl@sti.fi (Timo Lehtinen)
Newsgroups: comp.unix.ultrix,comp.sys.hp
Subject: Re: HP LaserJet III on an Ultrix 3.0 system
Message-ID: <1990Aug21.002427.5942@sti.fi>
Date: 21 Aug 90 00:24:27 GMT
References: <1990Aug20.205810.3656@cunixf.cc.columbia.edu>
Reply-To: ttl@sti.fi (Timo Lehtinen)
Organization: Stream Technologies Inc.
Lines: 33

In article <1990Aug20.205810.3656@cunixf.cc.columbia.edu> howie@cunixf.cc.columbia.edu (Howie Kaye) writes:
>
>I am trying to get a LaserJet III to work on an Ultrix system.  I have
>a script which, before outputting the file,  does a:
>
>	stty 9600 cs7 -cstopb -pass8 -parenb
>
>Which should (theoretically) set the line to no parity, 7 bits, 1 stop bit.

Why 7 bits? It will limit you on a lot of the more interesting uses 
for an LJIII. The following very simple printcap entry works for me:

ljet|lp1|1:\
	:af=/usr/adm/lp1acct:\
	:br#9600:\
	:fc#0177777:\
	:fs#023:\
	:lf=/usr/adm/lp1err:\
	:lp=/dev/tty01:\
	:mx#0:\
	:of=/usr/lib/lpdfilters/xf:\
	:pl#66:\
	:pw#80:\
	:sd=/usr/spool/lpd1:\
	:xc#0177777:\
	:xs#044000:\
	:sh:

-- 
       ____/ ___   ___/    /		Kivihaantie 8 C 25
      /           /       /		SF-00310 HELSINKI, Finland
   ____  /       /       /	Phone:	+358 0 573 161, +358 49 424 012
  Stream Technologies Inc.	Fax:	+358 0 571 384