Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!uunet!mcsun!ukc!strath-cs!prlhp1!pearmana
From: pearmana@prlhp1.prl.philips.co.uk (Andy Pearman)
Newsgroups: comp.sys.hp
Subject: pstat and vmstat on HP-UX 6.2
Keywords: vmstat pstat
Message-ID: <1131@prlhp1.prl.philips.co.uk>
Date: 21 Aug 90 09:46:50 GMT
Reply-To: pearmana@prlhp1.UUCP
Organization: Philips Research Laboratories, Redhill, UK
Lines: 31


I am running HP-UX 6.21 on an HP9000-350 with a fully configured
system.

Although documented in the reference manual, I can't find
pstat or vmstat anywhere.

Were these two very useful utilites implemented for the 300 series,
and if not, are they in versions 6.5 or 7.0 ??


Question number 2:

    Every now and again I get a message on the console saying that
the process tables are full.  Am I right in thinking that I
need to increase the value of MAXUSERS in /etc/conf/conf.c and
rebuild the kernel.

Its present value is 8.

Would 12 be a sensible value ????


   Thanks if you can help,

    Andy

-- 

Andy Pearman, Computer Dept, Philips Research Labs, Redhill, Surrey, England. 
              pearmana@prl.philips.co.uk