Path: utzoo!attcan!uunet!mcsun!ukc!strath-cs!cs.glasgow.ac.uk!kcl-cs!neil
From: neil@kcl-cs.UUCP (Neil Faulks)
Newsgroups: comp.sys.mac.hardware
Subject: SE Mem Upgrade Question
Message-ID: <1163@xenon.kcl-cs.UUCP>
Date: 20 Aug 90 09:52:46 GMT
Reply-To: neil@kcl-cs.UUCP (Neil Faulks)
Organization: Dept. of Computing, Kings College London
Lines: 14

Extactly what do I need to do to upgrade a 1Mb SE (4x256Ksimms)
to 4Mb using 4x1Mb Simms.

Is it okay to use 9-bit simms? (that's what I have!) Is it necessary
to hold any pins hi/lo? I would like to retain the ninth bit in case
I move the simms to a PC.

Are there any tricks involved in removing/replacing the main board, I
remember having to bend the board to get it back when I opened the Mac
to have a look.
-- 
Neil Faulks
..!ukc!kcl-cs!neil
neil%cs.kcl.ac.uk