Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!mips!daver!bungi.com!news Newsgroups: comp.sys.nsc.32k Subject: my pc532 is almost up. Message-ID: Date: 20 Aug 90 20:26:40 GMT Sender: news@daver.bungi.com Lines: 15 Approved: news@daver.bungi.com Could some of you out there give me some hints as to what I am doing wrong when I try to bring up my board? I can not see any activity on the ras, cas, or other dram signals, but there are some pulses on bank0. Also there are 200nS pulses about .5uS apart on slow, eprom, and the like. Is this normal? (I would expect some dram activity for stack...) I also do not see any activity on duart0 (or the others either.), and I have a PC com port hooked up to con3 on the board. I do not see any activity on the PC, at any speed I have set it for, what speed should I set the PC for, and what should characters should I send down the wire to wake the board up? Thanks for your help, and maybe VERY SOON (I can feel it...) I will have a working board. ---------------------------------------------------------------------- Jon Buller ..!texsun!letni!vector!jonb FROM Fortune IMPORT Quote; FROM Lawyers IMPORT Disclaimer;