Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uwm.edu!lll-winken!ncis.tis.llnl.gov!blackbird!udecc!turner
From: turner@udecc.engr.udayton.edu (Bob Turner)
Newsgroups: comp.unix.i386
Subject: SCSI to ESDI bridges
Message-ID: <1990Aug21.144355.19030@udecc.engr.udayton.edu>
Date: 21 Aug 90 14:43:55 GMT
Organization: Univ. of Dayton, School of Engineering
Lines: 22

Has anyone had any experience running an Adaptec ACB-4525Z 
SCSI to ESDI bridge controller. I am working with someone
who is running an ISC 2.0.2 system with a wd ESDI controller
and a couple of Maxtor 338 MB drives. To make a long story
short he wants to upgrade to SCSI.

We were planning to use a A1542B as the controller, and add
a SCSI Imprimis WREN along with the two Maxtors going through
the Adaptec ACB-4525Z. 

Typical of any jerry rigging we figure it can't be that easy.
What I was wondering has any one done something similar, and what 
problems you ran into. (Any comments from Roy Neese?)


					Bob

-- 
====================================================================
Bob Turner                    Network Manager, School of Engineering
513-229-3171                           turner@udecc.engr.udayton.edu
Univ. of Dayton, Engineering Computing Center-KL211, Dayton OH 45469