Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!microsoft!fredf From: fredf@microsoft.UUCP (Fred FREELAND) Newsgroups: comp.windows.ms Subject: Re: Fonts, Word for Windows Message-ID: <56818@microsoft.UUCP> Date: 22 Aug 90 16:40:16 GMT References: <8L*%-_#@rpi.edu> Reply-To: fredf@microsoft.UUCP (Fred FREELAND) Organization: Microsoft Corp., Redmond WA Lines: 23 In article marshall@wind55.seri.gov (Marshall L. Buhl) writes: >dorsai@pawl.rpi.edu (G. Donald Moncreaff) writes: > > >>however, i was unable to access the fonts from word, the only help word gave >>seems to be talking about using the control panel (which was already done or >>the fonts wouldn't have come up under write) > If, indeed the fonts are properly registered in Windows, you should be able to get Word For Windows to know about them by simply choosing printer setup in Word for Windows AND changing your current printer. If you change printers and then change back, you will force WfW to rebuild its font table. I don't have anything to do with Word for Windows other than I am a devoted user who ran into this problem. If you continue to have problems with your fonts, give me a call and I'll try to talk you through it. -- Frederick F. Freeland Jr. "Of all the things I've lost, Microsoft Corporation I miss my mind the most!" One Microsoft Way Redmond, WA 98052 (206) 882-8080 internet: fredf@microsoft.beaver.washington.EDU arpanet: fredf%microsoft@uw-beaver.ARPA uucp: uunet!microsoft!fredf Opinions expressed over this signature are my OWN and not those of my employer!