Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!mailrus!accuvax.nwu.edu!nucsrl!telecom-request
From: William.Degnan@f39.n382.z1.fidonet.org (William Degnan)
Newsgroups: comp.dcom.telecom
Subject: Re: Building a 1A2 Key Service Unit
Message-ID: <11402@accuvax.nwu.edu>
Date: 25 Aug 90 00:09:17 GMT
Sender: news@accuvax.nwu.edu
Organization: TELECOM Digest
Lines: 25
Approved: Telecom@eecs.nwu.edu
X-Submissions-To: telecom@eecs.nwu.edu
X-Administrivia-To: telecom-request@eecs.nwu.edu
X-Telecom-Digest: Volume 10, Issue 600, Message 1 of 9


In article <11088@accuvax.nwu.edu> atn@cory.berkeley.edu (Alan
Nishioka) writes:

> I am trying to build a box for my five line key system phone.  
> I want it to flash the lights and do automatic hold.
> The system I was going to time has been dismantled and replaced 
> with Panasonic phones with LEDs so you can't tell which line is 
> ringing...

I picked up a 1A2 with four line cards for five bucks. A few other
folks _gave_ me some key telephone sets. There is little commercial
value.  You probably would use more than $5 worth of gas picking up
the parts.  Why not see what you can find gathering dust someplace?


Regards,

Disclaimer: Contents do not constitute "advice" unless we are on the clock.
William Degnan                   | wdegnan@mcimail.com
Communications Network Solutions | !wdegnan@at&tmail.com
 -Independent Consultants        | William.Degnan@telemail.com
   in Telecommunications         | UUCP: ...!natinst!tqc!39!William.Degnan
P.O. Drawer 9530                 | ARPA: William.Degnan@f39.n382.z1.FidoNet.Org
Austin, TX 78766-9530            | Voice +1 512 323 9383