Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!mips!pacbell.com!pacbell!att!cbnewsh!tjt
From: tjt@cbnewsh.att.com (timothy.j.thompson)
Newsgroups: comp.music
Subject: Re: MIDI Driver for SVR3.2
Summary: devmidi
Keywords: MIDI, System V, SVR3, driver
Message-ID: <1990Sep1.131503.10244@cbnewsh.att.com>
Date: 1 Sep 90 13:15:03 GMT
References: <10396@life.ai.mit.edu>
Organization: AT&T Bell Laboratories
Lines: 12

In article <10396@life.ai.mit.edu>, tmb@ai.mit.edu (Thomas M. Breuel) writes:
> I'd like to use a MIDI board from SVR3.2. I would appreciate if you could
> help me with any of the following:
> * is there a free MIDI driver (with or without sources) for SVR3?

Yes (with source).  It's been posted to the net and is available in the
ucsd midi archive (it's called 'devmidi').  If you can't get it elsewhere,
I can mail it to you.  It supports MPU-compatible boards (which basically
restricts it to 80*86-based machines).  It supports only the UART
(non-intelligent (sic)) mode of the MPU.

            ...Tim Thompson...tjt@twitch.att.com...