Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!van-bc!eng!fff
From: fff@eng.UUCP (Fred Fierling)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: ka9q route command
Keywords: ka9q, route, /bits
Message-ID: <9@eng.UUCP>
Date: 29 Aug 90 01:01:58 GMT
Distribution: na
Organization: Microplex Systems Ltd
Lines: 16

This is the setup:  - IBM PC AT
                    - KA9Q version 900730
                    - version 6.5 wd8003e driver 
                    - WD8013 card
                    - 16550 UARTs

Everything works really well except for this command:

 route add 195.75.11.0/24 sl0

This causes one floppy access and then net goes off into never never land.

Any ideas?
-- 
Fred Fierling  mplex!fff@van-bc.wimsey.bc.ca Tel: 604 875-1461 Fax: 604 875-9029
Microplex Systems Ltd   265 East 1st Avenue   Vancouver, BC   V5T 1A7,  Canada