Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!usc!jarthur!cmcvx1.claremont.edu
From: bworrell@cmcvx1.claremont.edu (worrell, brandon lee)
Newsgroups: comp.sys.amiga.hardware
Subject: PAL mode on bootup
Message-ID: <8220@jarthur.Claremont.EDU>
Date: 28 Aug 90 17:26:01 GMT
Sender: news@jarthur.Claremont.EDU
Reply-To: bworrell@cmcvx1.claremont.edu
Organization: Claremont McKenna College
Lines: 13

My question is:  Is there a jumper or anything I can do to get my A500 with
ECS to boot up in PAL mode.  I love using PAL mode on my A500 and the easiest
way I have found to do it so far is to use the palcon program from the
PALboot 4.0 disk.  I autoboot my hard drive, interrupt the startup-sequence,
type palcon, and then reboot.  I then works perfectly.  Upon reset, my
display changes to PAL and then autoboots my hard drive.  Also, several
of my games are PAL and it's a pain to use the PALboot disk first.  I use
PAL much more then NTSC now and would rather use the PAL boot programs to 
boot is NTSC mode when I need it.  Does anybody know of a way to do this?
Thanks in advance......

--Brandon Worrell
bworrell@cmcvx1.claremont.edu