Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!jesup
From: jesup@cbmvax.commodore.com (Randell Jesup)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Pins on 2090 SCSI port (hooking to Bernoulli)
Message-ID: <14064@cbmvax.commodore.com>
Date: 29 Aug 90 21:10:15 GMT
References: <1990Aug12.142614.4107@NCoast.ORG>
Reply-To: jesup@cbmvax (Randell Jesup)
Organization: Commodore, West Chester, PA
Lines: 12

In article <1990Aug12.142614.4107@NCoast.ORG> davewt@NCoast.ORG (David Wright) writes:
>This problem aside, can the 2090 control both drives in the unit? Only the
>first drive seems to become active when I try to prep res2:, but I haven't
>seen any info on setting up a mountlist entry for a device at the same
>SCSI ID as another, just using a different logical unit.

	The 2090 driver only supports LUN 0.

-- 
Randell Jesup, Keeper of AmigaDos, Commodore Engineering.
{uunet|rutgers}!cbmvax!jesup, jesup@cbmvax.cbm.commodore.com  BIX: rjesup  
Common phrase heard at Amiga Devcon '89: "It's in there!"