Path: utzoo!utgpu!watserv1!watmath!att!pacbell!pacbell.com!ucsd!swrinde!zaphod.mps.ohio-state.edu!samsung!uunet!nfsun!eklektik!eric
From: eric@eklektik.UUCP (/dev/tty000)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Hardframe / ST296N problem...
Keywords: Seagate, ST296N, HardFrame
Message-ID: <5400@eklektik.UUCP>
Date: 29 Aug 90 04:02:19 GMT
References: <1990Aug24.061559.23378@santra.uucp>
Reply-To: eric@eklektik.UUCP (/dev/tty000)
Organization: Computers, Gerbils, and Games in the Basement, Pgh, PA
Lines: 15

In article <1990Aug24.061559.23378@santra.uucp> napo@niksula.hut.fi (Hannu Napari) writes:
>
>I seem to be having a slight problem with my HardFrame/ST296N. Last night
>it worked fine for several hours, until... I started to load a program,
>and then the r/w-led just stayed lit. The program didn't load and there

I had this problem with my ST296N (attatched to a StarbDrive).  Turns out
that the drive was getting too hot.  Once I got it properly mounted and 
ventilated, the problem went away.


-- 
---------------------------------------
Eric Kennedy                    eric@eklektik.pgh.pa.us
(formerly ejkst@pitt.UUCP)      ...pitt!idis!eklektik!eric