Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!ames!decwrl!sdd.hp.com!usc!rutgers!psuvax1!psuvm!jkt100
From: JKT100@psuvm.psu.edu (JKT)
Newsgroups: comp.sys.amiga.hardware
Subject: A2091 + 2 SCSI drives
Message-ID: <90216.004446JKT100@psuvm.psu.edu>
Date: 4 Aug 90 04:44:46 GMT
Organization: Penn State University
Lines: 22

I finally got a cable made to connect both the Quantum drives (a 40S and
a 105S) to my 2091.  When I connect it and power up, though, my 2000
only recognizes the 105S.  Both hard drives work fine when connected
independently, and neithe fried when I connected them up together, so
I don't think the cable is bad.  I did take the terminator packs out
of my 40S and put them in the 105S as the 2091 manual said I should.
I also changed jumper 5, option 1 on the 2091 to on, so the controller
would recognize more than one SCSI drive.  Is there anything I missed?
I did not get a manual with the 105S (bought second-hand) so if it
needs a unit number change or something, I don't know how to do it.

Any help or suggestions appreciated!

                                                            Kurt
--
 -----------------------------------------------------------------------
|| Kurt Tappe   (215) 363-9485  || Amigas, Macs, IBM's, C-64's, NeXTs, ||
|| 184 W. Valley Hill Rd.       ||  Apple ]['s....  I use 'em all.     ||
|| Malvern, PA 19355-2214       ||  (and in that order too!   ;-)      ||
||  jkt100@psuvm.psu.edu         --------------------------------------||
||  jkt100@psuvm.bitnet  jkt100%psuvm.bitnet@psuvax1  QLink: KurtTappe ||
 -----------------------------------------------------------------------