Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!samsung!uunet!ncrlnk!ncrwic!encad!entec!jsurine
From: jsurine@entec.Wichita.NCR.COM (James Surine)
Newsgroups: comp.sys.apple2
Subject: Re: "Missing" toolbox calls?
Message-ID: <667@entec.Wichita.NCR.COM>
Date: 28 Aug 90 12:50:08 GMT
References: <1990Aug26.082036.7841@cs.uoregon.edu>
Reply-To: jsurine@entec.UUCP (James Surine)
Organization: NCR Corporation, Wichita, KS
Lines: 19

In article <1990Aug26.082036.7841@cs.uoregon.edu> nparker@cie.uoregon.edu (Neil Parker) writes:
>Last week I finally got my hands on Toolbox Reference Vol. 3, and as I
>was typing the new stuff into my APW macro files (I'm using a REALLY old
>version of APW, so I have to update the macro files manually), I noticed
>something strange.  I noticed that there were some gaps in the tool
>numbers, and upon looking up the gaps in the TML Pascal UNIT files, I
>discovered that there were several calls which aren't documented in the
>Toolbox Ref.

These calls and others may not be completly implemented or do not work
properly yet (remeber all the trouble with text edit in TML Pascal). That's
my guess.


-- 
                                         ____________________________________
j.surine@Wichita.NCR.COM (Jim Surine)   |                                    |
NCR Peripheral Products Division        | I did not say this, I was not here | 
work (316)636-8586 home (316)721-6280  /_____________________________________|