Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!prls!pyramid!cbmvax!bpa!tci!mitchell
From: mitchell@tci.UUCP (Rob Mitchell)
Newsgroups: comp.sys.apple2
Subject: Fried GS! How reset Control Panel to scan all drives?
Keywords: GS, Control Panel
Message-ID: <501@tci.UUCP>
Date: 31 Aug 90 11:32:37 GMT
Distribution: comp
Organization: Technology Concepts, Inc. Sudbury Mass.
Lines: 26

Hiya,

	I in deep do-do on this one.

	I just installed CV Technology's SCSI/DMA card in my IIGS and
reset the Control Panel to boot from slot 3 (are slots numbered left
to right?).  Flipping the power switch results in my monitor displaying
some nice colors and blurps and nothing boots.  I moved the SCSI/DMA 
card to other slots, but to no avail.

	Does anyone know how to reset the Control Panel to scan after
you have already set it to a particular slot AND you cannot boot?

	I'm going to call Computer Factory (oh dread), the place I
purchased everything.

	Thanks in advance!!!



Rob Mitchell  Technology Concepts Inc.  Sudbury, MA.  01776 (508) 443-7311
	Bitnet:    ...!uunet!tci!mitchell
	Internet:  mitchell@tci.bell-atl.com
	America Online: RobertM308

Steep and Deep ... The only way!!  These are my opinions only.