Path: utzoo!attcan!uunet!lll-winken!uwm.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!decwrl!bacchus.pa.dec.com!decabo.dec.com!islnds.enet.dec.com!shatara
From: shatara@islnds.enet.dec.com (Chris Shatara)
Newsgroups: comp.sys.apple2
Subject: Re: Fried GS! How reset Control Panel to scan all drives?
Message-ID: <23@decabo.dec.com>
Date: 1 Sep 90 20:32:25 GMT
Sender: news@decabo.dec.com
Distribution: comp
Organization: Digital Equipment Corporation
Lines: 16

In article <501@tci.UUCP>, mitchell@tci.UUCP (Rob Mitchell) writes...
>	Does anyone know how to reset the Control Panel to scan after
>you have already set it to a particular slot AND you cannot boot?
> 

Rob,

Just hold the "OPTION" key down while powering up the machine.  You will be 
presented with a menu where if you type 1, you get into the control panel.

/chris
=============================================================================
|        Chris Shatara       |      Internet:    shatara@islnds.enet.dec.com|
|  Opinions expressed are    |      DEC Easynet: islnds::shatara            |
|   mine and mine only!      |      UUCP:        ...!decwrl!islnds!shatara  |
=============================================================================