Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcrware!ric
From: ric@mcrware.UUCP (Ric Yeates)
Newsgroups: comp.sys.atari.st.tech
Subject: DRAM Speed and Manufacturer
Summary: Am I going to get something that isn't going to work?
Keywords: DRAM speed Samsung 120ns
Message-ID: <2572@mcrware.UUCP>
Date: 29 Aug 90 19:20:44 GMT
Reply-To: ric@mcrware.UUCP (Ric Yeates)
Organization: Microware Systems Corp., Des Moines, Iowa
Lines: 20

Netlanders,

    I am going to upgrade my Aerco board from .5M to 2M.  All I need is
the 1Mbx1 DRAM chips.  My question is: Do I need to get relatively fast
chips or is it not going to make any difference for a 68000 system? If
anyone has any experience in this area, I would appreciate the help. 

Thanks,
    Ric

P.S.  I'm looking to get 120ns Intel DRAMS @ $6 if they don't need to be
any faster. 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Ric Yeates                ric@mcrware                  Microware Systems Corp.
  "I found these opinions on the floor, so I don't think they belong
                                                              to Microware."
                         1. Grease Generously
                         2. Wax Philosophically
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=