Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!snorkelwacker!ira.uka.de!smurf!gopnbg!tmpmbx!netmbx!ripley
From: ripley@netmbx.UUCP (Hans-Ch. Eckert)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: How do I connect an Amiga monitor to an ST?
Message-ID: <1105@netmbx.UUCP>
Date: 3 Sep 90 18:51:26 GMT
References: <6377.26de91a5@csv.viccol.edu.au> <707@zelator.UUCP>
Reply-To: ripley@netmbx.UUCP (Hans-Ch. Eckert)
Organization: netmbx, Berlin, West Germany
Lines: 18

In article <707@zelator.UUCP> techno@zelator.UUCP (Frank Dahncke) writes:
]timcc@csv.viccol.edu.au (Tim Cook) writes:
	[How to connect an Amiga-monitor to my ST?]

]Ah, but there is a simple solution: you need a ATARI-to-SCART adaptor cable.
Only that the newer versions of the Amiga-monitor don't have a
SCART-port anymore :-(
I got a special cable for my 1084 and have no trouble so far.
As I had to get a cable anyway, it wasn't much a difference...

Greetings,
				RIPLEY

-- 
Hans-Ch.Eckert, Regensburger Str. 2, D-1000 Berlin 30 [Tel: +49 030/246292]
eMail: ripley@netmbx.uucp (ripley%netmbx.uucp@db0tui6.bitnet [saves $$$])
Quote: "I'd rather type "cc fubar.c" than point-click-point-click-point-
       click-point-click-knock-over-my-coffee-cup." [Steve Yelvington, 2-11-89]