Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!tuvie!edvvie!eliza!johnny
From: johnny@edvvie.at (Johann Schweigl/104857600)
Newsgroups: comp.sys.handhelds
Subject: Re: How compatible is the HP-28S with the HP-48SX?
Message-ID: <245@eliza.edvvie.at>
Date: 24 Aug 90 21:03:53 GMT
References: <69@iconsys>
Organization: Edv GesmbH, Austria/Europa
Lines: 19

From article <69@iconsys>, by mday@iconsys (Matt Day):
> Does the FAST program (listed below) that set the clock speed on the 28S work
> for the 48SX?

No. The 48's clock speed is hardwired at the max speed you could squeeze out 
of your 28 through FAST.

> Is it possible to somehow transfer my stuff on the 28S to the 48SX via the
> infrared IO port?  Perhaps I could send my programs on the 28S to the infrared
> port like I was printing to the printer, and read and translate the data on
> the 48SX end back into normal program format?

This is done by the INPRT program contained on the disk that comes with 
the serial interface kit.
-- 
This does not reflect the   | Johann  Schweigl | DOS?
opinions of my employer.    | johnny@edvvie.at | Kind of complicated
I am busy enough by talking |                  | bootstrap loader ...
about my own ...            |   EDVG  Vienna   |