Path: utzoo!censor!geac!aeshq!hon
From: hon@aeshq.UUCP (hon)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: SCSI ID
Keywords: SCSI
Message-ID: <757@aeshq.UUCP>
Date: 29 Aug 90 16:14:17 GMT
Organization: AES Headquarters, Environment Canada, Toronto, Canada
Lines: 11


     Can anyone help me in setting up SCSI IDs on Seagate harddrives.  I been having trouble trying to install
more than two drives lately.  From what I have heard you need to place some jumpers on the pins by the 50-pin
SCSI connector. But when I start adding the jumpers on, the SCSI ID (which is identified at startup) remains 
the same. The drives ID's have to be unique, and all I can manage to get is 0 or 6. Is there another method of 
doing this task, or does anyone have the right settings for the jumpers. The drives that I am using are Seagate
157N and 251N. Also I have an Quantum 280 also, which seems to be having the same problem.

Hon Ming

uunet!jtsv16!geac!aeshq!hon