Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!bunyip!iceman!chma
From: chma@iceman.jcu.oz (Michael Antolovich)
Newsgroups: comp.sys.mac.hardware
Subject: Adding Memory to an SE30 (Yeah I know, sorry !)
Keywords: Just a few tips wanted
Message-ID: <908@iceman.jcu.oz>
Date: 31 Aug 90 05:55:01 GMT
Organization: JCUNQ, Townsville, Qld, Australia
Lines: 20


Well I have an SE30 with 4Megs of memeory, and now a friend of mine has given
me 4 256K chips (he upgraded his SE30 to 8Megs :-).  My obvious question is as
follows:-
	Anyone have any tips on what I should do to add this memory to my Mac.
I know that they will go in the empty bank, I know they are the correct speed
and I know there is no resister to clip.  I also know that I have to earth
myself (and the Mac) well.  What I am really asking is, is there anything I
have to be careful of when I open it up ?  (I will do some dusting while I'm
there too :-).  From memory I should discharge the voltage somewhere (the
screen ?)  Can I get to the memory slots without diconnecting the screen ?
(am I foolish for even contemplating that idea ?)
	Anyway, please e-mail this to me (I know that most of this is old news
so the net shouldn't be burdened again :-)
					Thanks again,
					Michael.
PS I have a nice Torx Driver, it came with some other equipment in our
department :-)
PSS  There are two e-mail addresses for me :-
chma@iceman.oz   or   chma@groper.jcu.edu.au  (prefered)