Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!mdcbbs.com!spain
From: spain@mdcbbs.com
Newsgroups: comp.sys.mac.hardware
Subject: Has anyone been able to get a CDR-35 to work?
Message-ID: <1990Sep1.160851.1018@mdcbbs.com>
Date: 1 Sep 90 23:08:51 GMT
Organization: McDonnell Douglas M&E, Cypress CA
Lines: 21

Has anyone been able to hook up a CDR-35 (NEC CDROM) to a SCSI port along with
a hard drive?

The (ob)structions point out that the CDROM has to be *before* the hard drive
(in other words the hard drive must be on the end).  Unfortunately, the CDR-35
has only *one* 50 pin connector.

I can get my hard drive to work (two SCSI ports) by itself, and the CDROM works
by itself but when I daisy chain them together the system refuses to see the
hard drive.

The CDROM is hard coded to address 1.  I tried the hard disk at addresses 0, 2,
and 6 (no luck).

Please respond via E-mail and I'll summarize to the net.  Thank you very much!

-- 
  Harrison M. Spain III  ...     Voice: (714) 952-6114
  McDonnell Douglas M&E  ...  Internet: spain@mdcbbs.com
  5701 Katella Avenue    ...      UUCP: uunet!mdcbbs.com!spain
  Cypress, CA  90630     ...       PSI: PSI%31060099980019::SPAIN