Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!hub.ucsb.edu!jsimon
From: jsimon@voodoo.ucsb.edu
Newsgroups: comp.sys.mac.programmer
Subject: Re: MNP modems
Message-ID: <6180@hub.ucsb.edu>
Date: 28 Aug 90 21:25:53 GMT
Sender: news@hub.ucsb.edu
Organization: UC, Santa Barbara. Physics Computer Services
Lines: 11

-Message-Text-Follows-

In article <1990Aug28.181857.19878@svc.portal.com>, daven@svc.portal.com writes...

>You will probably want to setup WK to run at 9600 baud. Then turn on WK's
>and the modem's hardware handshake, but only if you have a modem cable
>that supports hardware handkshake. If not, then use Xon/Xoff in both WK
>and the modem, but only if you're not going to use X/YMODEM.

What about ZModem? Can you use MNP5 and software handshaking at the same
time?