Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!wuarchive!uunet!mcsun!ukc!strath-cs!cs.glasgow.ac.uk!de
From: de@cs.glasgow.ac.uk (David England)
Newsgroups: comp.sys.transputer
Subject: Re: gfx + cstools (was none)
Message-ID: <6196@hawaii.cs.glasgow.ac.uk>
Date: 1 Sep 90 13:16:16 GMT
References: <13918.9008281334@prg.oxford.ac.uk>
Reply-To: de@cs.glasgow.ac.uk (David England)
Organization: Comp Sci, Glasgow Univ, Scotland
Lines: 21

In article <13918.9008281334@prg.oxford.ac.uk> S030@cpc865.east-anglia.ac.uk writes:
>This is in response to Paul Mitchell's question about whether GFX
>will run with CSTools. It is specific to Meiko systems.
>
>Yes, as I understand it, GFX is supposed to be usable with CSTools.
>
There was a problem with the example program that first came with gfx for
cstools - the example crashed on one routine. The version we now have does
work ok. However there is no mouse input support yet in gfx/cstools so
you'll still need to use ops/occam/gfx for that.

BTW this based on experience with an MK052 board.

Dave


-- 
ARPANet: de%cs.glasgow.ac.uk@{ucl-cs.arpa,nsfnet-relay.ac.uk}
JANET:   de@uk.ac.glasgow.cs
Phone:   +44 (0)41 339-8855 ext 5569
UseNet:  mcsun!ukc!cs.glasgow.ac.uk!de