Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!stiatl!slammer!todd
From: todd@slammer.UUCP (Todd Merriman)
Newsgroups: comp.unix.i386
Subject: Re: ISC 2.2 and 2 disk controllers (ST506/SCSI)
Keywords: ISC 2.2, SCSI, ST506, boot, broken
Message-ID: <641@slammer.UUCP>
Date: 4 Sep 90 04:04:50 GMT
References: <2359@crlabs.CRLABS.COM>
Reply-To: todd@slammer.UUCP (Todd Merriman)
Organization: Software Toolz, Inc. - Atlanta, GA
Lines: 19

In article <2359@crlabs.CRLABS.COM> cwiener@CRLABS.COM writes:
>I have recently upgraded from 2.0.2 to 2.2 and found that the 2.2 kernel
>with SCSI support built in will not boot.  My configuration is as follows:
>
>Primary DTC 7280 1:1 MFM ST506 controller with ST4096 Seagate 80M drive.
>
>Secondary Adaptec 1542B SCSI controller with Wren V 660M drive set up as
>
>
>The HPDD configuration selected is as follows:

This is identical to the configuration I tried to bring up.  After
two days of plugging controllers in and out and building kernels, I gave up
and tossed out all MFM stuff.

   Todd Merriman
   Software Toolz, Inc.
   8030 Pooles Mill Dr., Ball Ground, GA 30107-9610
   todd@slammer.UUCP, V-mail (800) 869-3878, (404) 889-8264