Newsgroups: comp.windows.ms
Path: utzoo!utgpu!cunews!bnrgate!bigsur!bcars268!andrzej
From: andrzej@bcars268.UUCP (Andrzej Bieszczad)
Subject: Re: Getting fonts working
Message-ID: <1990Aug28.135645.6158@bigsur.uucp>
Sender: news@bigsur.uucp (Usenet)
Reply-To: andrzej@bcars268.UUCP (Andrzej Bieszczad)
Organization: Bell-Northern Research, Ottawa, Canada
References:  <90239.155217MXP122@psuvm.psu.edu>
Date: Tue, 28 Aug 90 13:56:45 GMT

In article <90239.155217MXP122@psuvm.psu.edu>, MXP122@psuvm.psu.edu
(Malzor) writes:
|>
|>I recently got a hold of a lot of fonts for msWindows 3.0.  I installed them
|>using the control panel.  Now that they're installed, what can I use
them with?
|>Microsoft Write doesn't seem to want to use them.  Is there anyway to
use them
|>with Window's Write?

I obtained a copy of the fonts from cica.cica.indiana.edu, I decoded 
them (using LHarc) and installed in my system. I started Word, went to
setup a printer changed the printer to PostScript ... the fonts did not
appear in Word. The same with Write (and couple of other programs).
I can review all the fonts using Control Panel, but can do nothing more
with them.

Are they useless?
     
=======================================================================
Andrzej Bieszczad (Bell-Northern Research, Ltd.)
USENET:  uunet!bnrgate!bigsur!andrzej
BitNet:  andrzej@BNR.CA
Surface: Dept. 7G12, P.O. Box 3511, Station C,    Phone: (613) 763-2259
         Ottawa, Ontario, Canada, K1Y 4H7         Fax:   (613) 763-3283
=======================================================================