Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!ub!ubvmsd.cc.buffalo.edu!v058qj6n
From: v058qj6n@ubvmsd.cc.buffalo.edu
Newsgroups: sci.electronics
Subject: Re: Jamming Stereo Amplifiers
Summary: Too much noise eh,well burn him out.
Keywords: Danger
Message-ID: <34185@eerie.acsu.Buffalo.EDU>
Date: 30 Aug 90 00:32:05 GMT
References: <55713@iuvax.cs.indiana.edu> <1378@gold.GVG.TEK.COM>
Sender: news@acsu.Buffalo.EDU
Reply-To: v058qj6n@ubvmsd.cc.buffalo.edu
Followup-To: Sci.electronics
Distribution: na
Organization: Robotics
Lines: 20
Nntp-Posting-Host: ubvmsd.cc.buffalo.edu
News-Software: VAX/VMS VNEWS 1.3-4.2

In article <1378@gold.GVG.TEK.COM>, grege@gold.GVG.TEK.COM (Greg Ebert) writes...

>Actually, this technique will work on other devices. Er, um, make that
>everything. Period.

>Go down to the offending neighbor's elctrical panel and disconnect the
>neutral line. Touch it to one 'hot' lead, then the other. Now every
>appliance has gotten a taste of 220 volts. Hopefully his breakers
>didn't go CLICK before the nasty deed was done.
	

	This is dangerous as you cause a big fire in the offending neighbor's
 apartment. Is that the essence of your scheme,burn him out ?


>Should be possible. The condo I used to live in had 4 conductor cable
>(GND/NEUTRAL/L1/L2). The neutral line was connected to ground at the
>meter/distribution panel, NOT at the breaker panel inside the unit.
			
						Klymaxx