Path: utzoo!utgpu!watserv1!watmath!att!pacbell!pacbell.com!decwrl!sdd.hp.com!samsung!ernie.viewlogic.com!curly!alan
From: alan@curly.Viewlogic.COM (Alan Medsker)
Newsgroups: comp.dcom.lans
Subject: Re: PSERVER VAP with MACVAP's 1.1
Message-ID: <1990Sep7.090342@curly.Viewlogic.COM>
Date: 7 Sep 90 13:03:42 GMT
References: <55844@iuvax.cs.indiana.edu> <1990Sep6.124912.17850@techbook.com>
Sender: news@viewlogic.com (News Administrator)
Reply-To: alan@curly.Viewlogic.COM (Alan Medsker)
Organization: Viewlogic Systems, Inc., Marlboro, MA
Lines: 24

In article <1990Sep6.124912.17850@techbook.com>, kenh@techbook.com (Ken Haynes) writes:
|> 
|> You can either UPGRADE to 3.0,
|> with all it's upgrading problems or install an external bridge that can
|> then run the VAPs, or run PSERVER.EXE and run a remote print server.

Except the Mac NLM isn't yet available.  With 3.0 you ALWAYS need an
external "bridge" to run the Mac VAPs.

Alan

--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Alan Medsker                                 Viewlogic Systems, Inc.
Voice: (508) 480-0881                        293 Boston Post Road West
Fax: (508) 480-0882                          Marlboro, MA  01752
Internet: amedsker@Viewlogic.COM
cc:Mail: Alan Medsker at Viewlogic
CI$: 76376,662
BIX: amedsker
2 Meters: WB0SQR
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
My opinions, of course.  And don't hold me to them.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=