Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!julius.cs.uiuc.edu!apple!mips!sjsca4!poffen
From: poffen@sj.ate.slb.com (Russ Poffenberger)
Newsgroups: comp.dcom.modems
Subject: Re: Slowing down touch-tone dialing?
Message-ID: <1990Sep7.194206.27774@sj.ate.slb.com>
Date: 7 Sep 90 19:42:06 GMT
References: <1111100011@cdp>
Reply-To: poffen@sj.ate.slb.com (Russ Poffenberger)
Organization: Schlumberger Technologies, San Jose, CA.
Lines: 23

In article <1111100011@cdp> cidai@cdp.UUCP writes:
>
>How can I tell the modem to dial touch-tone slower?? We are
>overseas with a poor national telephone system and the
>number is dialed too quickly making it impossible to connect
>on long strings. I use ProComm and I know there's a modem
>setup code in there somewhere that can slow this thing down.
>The modem is a WorldPort Fax/Modem. Thanks for any help.


If it is a hayes compatible modem, then register S11 sets the touch tone
timing. The deafult is usually 95ms. Try this command to the modem

ATS11=delay

Where delay is between 50 and 255. Sounds like you might want to try the
maximum of 255ms.


Russ Poffenberger               DOMAIN: poffen@sj.ate.slb.com
Schlumberger Technologies       UUCP:   {uunet,decwrl,amdahl}!sjsca4!poffen
1601 Technology Drive		CIS:	72401,276
San Jose, Ca. 95110             (408)437-5254