Path: utzoo!utgpu!watserv1!watmath!att!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!wb3ffv!howardl
From: howardl@wb3ffv.ampr.org ( WB3FFV)
Newsgroups: comp.dcom.modems
Subject: Re: Strange TB Problem - Any Ideas?
Message-ID: <3704@wb3ffv.ampr.org>
Date: 10 Sep 90 22:59:35 GMT
References: <316@ntc.UUCP>
Organization: Advanced Business Solutions - Baltimore , MD
Lines: 32

From article <316@ntc.UUCP>, by olaf@ntc.UUCP (Olaf Kaestner):
> In article <944@bilver.UUCP>, bill@bilver.UUCP (Bill Vermillion) writes:
>> I have been running a Trailblazer Plus for about 2 years.
>> Everything has been going smoothly.
>> 
>> About 6 weeks ago I noticed that system would hang on an outgoing
>> newsfeed.  It happened sporadically and I assumed it was a problem
>> on the feed end.
> 
> we had similar problems until we changed the value of internal
> register S58 to 2. We had it at 3 before and we would get
> random lockup and data loss on the line.
> 
> I hope that S58=2 solves your problem, too. Let me know!
> Olaf


  Hello Olaf,

I also use the Telebit Trailblazer, and have experienced the same problem
that Bill has seen (but only with one of the eleven sites that I talk with)
and I have the S58 register set to 2.  I DO use hardware flowcontrol, and it
works great, and I agree that having S58=3 is asking for trouble.  I don't
know if this is Bill's problem, but it sure isn't the solution on my side.
If anybody has any other good ideas I would love to hear them...


-------------------------------------------------------------------------------
Internet  : howardl@wb3ffv.ampr.org	|	Howard D. Leadmon
UUCP      : wb3ffv!howardl		|	Advanced Business Solutions
TELEX     : 152252474     		|	210 E. Lombard St - Suite 410
Telephone : (301)-576-8635		|	Baltimore, MD  21202