Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!yale!mintaka!snorkelwacker!apple!portal!cup.portal.com!mde From: mde@cup.portal.com (Michael Dennis Evenson) Newsgroups: comp.os.minix Subject: Re: Porting Minix to `generic' 68020 machine. Message-ID: <33818@cup.portal.com> Date: 12 Sep 90 14:42:09 GMT References: Organization: The Portal System (TM) Lines: 15 A couple of us have ported the ATARI version to a Peripheral Technology PT68K-2. Its a 68000 system running at 12.5 MHZ with PC expansion slot accessibility. It will take off the self generic XT adaptor boards. The only problem is that it can only address the memory and IO spaces on the boards on the odd bytes. (68K has no A0 - only Low and High byte signal). This means that you cannot replace the ROMS with 68K versions of the drivers and expect them to execute. All drivers have to be in memory. We have successfully gotten it to run with 2793 floppy controller, an XTGEN hard disk controller, and a Hercules mono graphics card. We are also able to use the parallel port on the Mono Card. I run a BBS in TEXAS at 817-488-8398 and have the mods available for download. Check it out. Mike Evenson