Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwvax!astroatc!nicmad!madnix!robert
From: robert@madnix.UUCP (Robert Moldenhauer)
Newsgroups: comp.sys.amiga
Subject: No K directive?
Keywords: Weird message on Execute
Message-ID: <1526@madnix.UUCP>
Date: 4 Sep 90 21:12:52 GMT
Organization: MADNIX, operated by: ARP Software  Madison WI
Lines: 23

I have a problem.  I have a 2090 controller card, so I must boot from a 
floppy and then shift to the hard drive later, my df0:s/Startup-Sequence
is as follows:
BindDrivers
Assign Sys: Dh0:System
Assign S: Sys:s
(several mre assigns to get all system files off Df0:)
Execute S:Startup-Sequence
EndCLI

I've never had any problems with it, but now execute complains "No K directive",
What's wrong?  The errors started occuring after I started using Time Waste 
Management System, could they have don't something to my System?
The Startup-Sequnce dies, I'm left with a CLI prompt, if I then type:
Execute S:Startup-Sequence
everything works normally, the CLI even goes away like it's supposed to,
what's going on?

-- 
Robert Moldenhauer                              One People
U.S. Snail: 30 Lathrop St.,                     One Planet
            Madison, Wis 53705 USA              Please!
BITNET: rmoldenhauer@WISCMACC      INTERNET: rmoldenhauer@VMS.MACC.WISC.EDU