Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!jarthur!nntp-server.caltech.edu!tybalt.caltech.edu!toddpw
From: toddpw@tybalt.caltech.edu (Todd P. Whitesel)
Newsgroups: comp.sys.apple2
Subject: Re: 3.5 & 5.25 drive problem
Message-ID: <1990Sep5.183321.1005@laguna.ccsf.caltech.edu>
Date: 5 Sep 90 18:33:21 GMT
References: <1990Sep5.053100.22732@ux1.cso.uiuc.edu>
Sender: news@laguna.ccsf.caltech.edu
Distribution: na
Organization: California Institute of Technology
Lines: 18

msm26708@uxa.cso.uiuc.edu (Michael S Mackovitch) writes:

>I recently had to use my Apple 5.25" drive for more than a dust collector.
>Unfortunately, when I connected it to my Apple 3.5", the 3.5" drive is
>completely ignored.  mY question: What's Wrong?

1. the 5.25" should be the furthest out from the GS (cable wise).
2. the DMA SCSI sounds like it is in slot 7, in which case it should not be
	a problem.
3. If both slot 5 and 6 are default (smart port and disk port) and you have the
	3.5" plugged into the GS disk port and the 5.25" plugged into the 3.5",
	then all should be well and you should see the 3.5" in slot 5 drive 1
	and the 5.25" in slot 6 drive 1.

hope this extra info helps you find the problem.

Todd Whitesel
toddpw @ tybalt.caltech.edu