Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!decwrl!claris!jazzman
From: jazzman@claris.com (Sydney R. Polk)
Newsgroups: comp.sys.apple2
Subject: Re: AWGS w/ Epson
Message-ID: <11240@claris.com>
Date: 12 Sep 90 00:33:26 GMT
References: <4587UD151606@NDSUVM1>
Organization: Claris Corporation, Santa Clara CA
Lines: 28

From article <4587UD151606@NDSUVM1>, by UD151606@NDSUVM1.BITNET (Steve Drees):
> Has anyone out there had any luck getting AWGS to recognize an Epson LX-800
> printer? My setup is as follows: Rom 03 GS (3 Megs RAM), SMT parallel interface
> (in slot1 with slot1 set to Your Card) 1 3.5" drive., Zoom modem in slot2.
> 
> Any help will be greatly appreciated.
> -------
> +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
> | Steve Drees      | Can you feel the pain he feels as the nails go   |
> | UD151606@NDSUVM1 | through his hands? -The Violet Burning           |
> +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
You have to install the card and printer driver using the Installer
and then set it up in the Control Panel.  Unfortunately, I do not
believe that your interface card is supported.  You also need
to make sure you have System 5.0.2 or later, because they did
a lot of work on the Epson driver.  (It also helps if you have
AWGS 1.1.  It's a lot friendlier about memory and prints better as
a result.)





-- 
Syd Polk           | Wherever you go, there you are.
jazzman@claris.com | Let the music be your light.
GO 'STROS!         | These opinions are mine.  Any resemblence to other
GO RICE!           |  opinions, real or fictitious, is purely coincidence.