Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!bionet!hayes.fai.alaska.edu!acad3.fai.alaska.edu!fsdmb3 From: fsdmb3@acad3.fai.alaska.edu (BRAUN DAVID M) Newsgroups: comp.sys.atari.st Subject: Re: PC DITTO II Summary: HELP Message-ID: <1990Sep6.104357.25620@hayes.fai.alaska.edu> Date: 6 Sep 90 10:43:57 GMT References: <1935@ac.dal.ca> Sender: usenet@hayes.fai.alaska.edu (J Random USENET) Reply-To: fsdmb3@acad3.fai.alaska.edu Distribution: usa Organization: University of Alaska Fairbanks Lines: 28 News-Software: VAX/VMS VNEWS 1.3-4 In article <1935@ac.dal.ca>, ssmith@ac.dal.ca writes... >I have a friend who has installed PC DITTO II in his atari. He said he has >been trying to make it work for a month now. I have no experience with atari >products but know somthing about ibm stuff. >Does anybody know if there are any tricks to making this product work. >Are there any jumper or switch setting to be concerned about? >Any hints or basic concerns (ie interrupts, dma, etc) wouldm be appreciated. >Please post to this list > >Thanks, G. James I got my PC-ditto working the first try when I installed it, it died a month later but that is a different story. Make sure that the pins of the 68000 piggyback connecter are tight, bend the pins inward (EVENLY!) so that it snaps on tight. make sure you put in the jumper if you don't have a coprocessor. re-check the lines on the cables, they should be oposite on either end, they cross in the middle. If it is installed correctly it should come up with the main screen fairly quickly after running the program (on a hard drive). That is about all I can think of right off hand, the PCDMENU program has OK defaults, just check which drive is designated as A and B. Hope this helps. 8-) -------------------------------------------------------------------------------- David M. Braun FSDMB3@ALASKA.BITNET Samurai and Lizards, Reptiles and Samurai. fsdmb3@acad3.fai.alaska.edu --------------------------------------------------------------------------------