Xref: utzoo comp.sys.atari.st.tech:282 comp.sys.atari.st:30706
Path: utzoo!utgpu!news-server.csri.toronto.edu!helios.physics.utoronto.ca!ists!gkcl!os9paul
From: os9paul@gkcl.ists.ca (Paul Good)
Newsgroups: comp.sys.atari.st.tech,comp.sys.atari.st
Subject: HD Help Needed
Message-ID: <12320@ists.ists.ca>
Date: 11 Sep 90 04:39:23 GMT
References: <1990Jul31.165603.20869@msuinfo.cl.msu.edu> <1407@wet.UUCP> <1990Sep10.105324.26957@agate.berkeley.edu> <6916.26ec1e71@uwovax.uwo.ca>
Sender: news@ists.ists.ca
Reply-To: os9paul@gkcl.UUCP (Paul Good)
Followup-To: comp.sys.atari.st.tech
Organization: y
Lines: 28

Is it possible to connect more than one SCSI device to the SH204 host adapter?

I have tried the following, but have not been able to get the computer to
recognize more than one drive at a time:

Setup one:

SH204-----Seagate 251N-----Adaptec4000A=====Seagate 251 (LUN 0)
  
Setup two:

SH204-----Seagate 251N-----Seagate 225N

Perhaps I am mistaken about some aspect of how SCSI works, but I thought
that I should be able to use setup one and have the 251N as DEV 0, LUN 0
and the Adaptec/251 as DEV 1, LUN 0.

Has anyone been able to connect more than one SCSI device or intermix
imbedded drives with Adaptec controllers?  Is this possible with the
SH204 host adapter or must I buy a different flavor?  Any ideas about
wht I may be doing wrong?

TECH INFO:  The SH204 host adapter has the ADE PAL installed.  Hard drive
software is Supra 2.72; TOS is 1.4.

--

Paul Good   INTERNET: os9paul@gkcl.ists.ca   UUCP: ists!gkcl.ists.ca!os9paul