Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!mips!ultra!jimh
From: jimh@ultra.com (Jim Hurley)
Newsgroups: comp.sys.atari.st.tech
Subject: Does TOS convert CR to CR/LF on printing?
Message-ID: <1990Sep12.233632.3227@ultra.com>
Date: 12 Sep 90 23:36:32 GMT
Organization: Ultra Network Technologies
Lines: 20

I wanted to print some overstrike graphics on my Epson-compatible.
I believe I have all the dip-switches set so that isolated CR's
do not linefeed. Yet I can't get this to print correctly - all
CR's appear as CR/LF.

I know that TOS-written records end in CR/LF, but these ASCII files
were not generated by TOS.

I'm not sure but I think TOS is changing the CR to CR/LF's on the 
way to the printer. Before I go banging my head any further:

Is this correct? If so, is there a way to disable it?
If TOS is at 'fault' would some kind soul explain the conditions
under which this transformation occurs in general and a bit
of rationalization on why?
Thanks,

-- 
Jim Hurley --> jimh@ultra.com  ...!ames!ultra!jimh  (408) 922-0100
Ultra Network Technologies / 101 Daggett Drive / San Jose CA 95134