Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!sdd.hp.com!dwagner
From: dwagner@sdd.hp.com (Dave Wagner)
Newsgroups: comp.sys.ibm.pc.misc
Subject: setting com. ports
Keywords: baud
Message-ID: <1990Sep10.182235@sdd.hp.com>
Date: 11 Sep 90 01:22:35 GMT
Sender: news@sdd.hp.com (Usenet News)
Reply-To: dwagner@sdd.hp.com (Dave Wagner)
Organization: Hewlett-Packard, San Diego Division
Lines: 15
Nntp-Posting-Host: hpsdl131.sdd.hp.com


	I'm looking for a program (public domain - hopefully)
	that will let me change the com ports baud rate.

	It should also let me change parity. Its will be used
	on Dos3.1 or Dos3.2 (IBM compatible). And I hear that the
	earlier dos will not support the higher baud rates. or the
	com3 /com4 ports. 

	It should do something like:

		setbaud com1:19200,8,n,1

	I know how to use the mode command but it will not work in this
	case. Can any one help on this one.