Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!wuarchive!udel!udccvax1!brahms.udel.edu!jarom
From: jarom@brahms.udel.edu (Carol Jarom)
Newsgroups: comp.sys.ibm.ps2.hardware
Subject: Re: Floppy Drive Change line
Summary: check cable
Message-ID: <13473@brahms.udel.edu>
Date: 5 Sep 90 14:23:08 GMT
References: <1990Sep4.193333.474@aucs.uucp>
Organization: University of Delaware
Lines: 10

In article <1990Sep4.193333.474@aucs.uucp>, 720323w@aucs.uucp (Bill Wilder) writes:
> I'm having problems on a PS/2 model 70. DOS does not always
> recognize when a floppy has been exchanged (drive A: 1.44MB)
> and control/C is sometimes needed to properly read replaced
> disk.
> 
*****
Check the cable from your drive adapter card to the drive and make
sure it is firmly connected.  Even a slight bit of play in the
connection can cause this problem.