Xref: utzoo comp.sys.mac.misc:3110 comp.sys.mac.hardware:5257
Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!decwrl!shelby!nmaluf@sierra
From: nmaluf@sierra.STANFORD.EDU (nmaluf)
Newsgroups: comp.sys.mac.misc,comp.sys.mac.hardware
Subject: SE/30 Screen Scan Problem
Message-ID: <264@sierra.STANFORD.EDU>
Date: 8 Sep 90 19:15:25 GMT
Sender: nmaluf@sierra.Stanford.EDU (Nadim I. Maluf)
Distribution: usa
Organization: Stanford University
Lines: 6

Excuse my ignorance of the mac hardware, but I have a basic SE/30 with
a tilted screen scan problem, i.e. the scanned image on the 9" screen is
not aligned with the plastic frame, but is tilted to the left by
approximately 10-15 degrees.
I know it should be fixed by adjusting some screw but I don't know
which one. Any help or comments would be appreciated.