Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!rice!rice!sun-spots-request
From: evan@goanna.cs.rmit.oz.au
Newsgroups: comp.sys.sun
Subject: Drive not recognised by diag
Keywords: Hardware
Message-ID: <1990Sep12.175852.11494@rice.edu>
Date: 12 Sep 90 17:58:52 GMT
Sender: sun-spots-request@rice.edu
Organization: Sun-Spots
Lines: 23
Approved: Sun-Spots@rice.edu
Originator: spots@walhalla.rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 312, message 10

We are attempting to install a new Micropolis 1588-15 SCSI drive with a
Sun 3/60 running SunOS 3.5 via an Emulex MD21 controller.  The controller
already has a SCSI disk and tape drive attached.

The new drive is set to be SCSI unit 1, the Emulex unaltered, however diag
cannot find the new drive, instead producing:

ncycl 1614 acyl 2 nhead 15 nsect 54 interleave 1
reset the SCSI bus...
Test unit ready failed, cyl=0, head=0, sector=0 scb: 2 check
sense bytes: 70 0 2 0 0 0 0 A 0 0 0 0 FF
sense class 7
	sense key 2 Not Ready.
	block no. 0

It still works fine for unit 0, and the drive is ok.

Have we missed something obvious?  Thanks in advance for any information.

 -------------------------------8<-------------------------------
 Evan Harris
 evan@goanna.cs.rmit.OZ.AU              Dept. of Computer Science
 ...!uunet!goanna.cs.rmit.OZ.AU!evan         RMIT, Australia